Menu

Jaecoo Omoda 5, Omoda 5 HEV, Omoda E5 Recall R/2026/013: Potential Loosening Of Wheel Hub Nut, Who Is Affected And What To Do

DVSA reference R/2026/013, campaign code TUB-2601.022.01. Data updated daily from DVSA.

Book soon
How serious
3 Feb 2026
Launched
35,479
vehicles in the UK
TUB-2601.022.01
Manufacturer’s campaign code

Jaecoo recalled Omoda 5, Omoda 5 HEV, Omoda E5 vehicles built between 4 July 2023 and 10 March 2026. Market feedback has identified a few limited instances of an improperly locked driveshaft nut that may cause wheel vibration and abnormal noise on Omoda 5 and E5 models. The recall notice describes the fix as: to address this issue authorised dealers are required to inspect the driveshaft nut locking condition on all affected vehicles. Where any non conformity is identified corrective measures shall be undertaken in accordance with Omoda and Jaecoo UK Limited s technical instructions. You won't usually pay for it.1

What’s Wrong

Market feedback has identified a few limited instances of an improperly locked driveshaft nut that may cause wheel vibration and abnormal noise on Omoda 5 and E5 models.

DVSA's Original Wording

Concern: Potential Loosening of Wheel Hub Nut Defect: Market feedback has identified a few limited instances of an improperly locked driveshaft nut that may cause wheel vibration and abnormal noise on Omoda 5 and E5 models. Remedy: To address this issue authorised dealers are required to inspect the driveshaft nut locking condition on all affected vehicles. Where any non conformity is identified corrective measures shall be undertaken in accordance with Omoda and Jaecoo UK Limited s technical instructions.

Contains public sector information licensed under the Open Government Licence v3.0.

The Risk

If the fault occurs, the recall notice says it could cause wheel vibration and abnormal noise on Omoda 5 and E5 models.

The Fix

The recall notice describes the fix as: to address this issue authorised dealers are required to inspect the driveshaft nut locking condition on all affected vehicles. Where any non conformity is identified corrective measures shall be undertaken in accordance with Omoda and Jaecoo UK Limited s technical instructions.

Are You Affected?

Omoda 5, Omoda 5 HEV, Omoda E5 built between 4 July 2023 and 10 March 2026 may be included. Jaecoo estimates 35,479 vehicles in the UK. Enter your registration to check, then confirm by VIN with Jaecoo, because not every car in the date range may be included.

What To Do Now

  1. Check your car by registration above, then by VIN with Jaecoo.
  2. Book with any franchised Jaecoo dealer, quoting the campaign code TUB-2601.022.01 or the DVSA reference R/2026/013. See how to get a Jaecoo recall fixed.
  3. Follow the letter's instructions until the repair is done. See can you drive a car with a recall?.

No other recalls for this model in DVSA’s data.

This is one of 3 Jaecoo recalls in DVSA’s data. The one launched after it was R/2026/069 on 2 Mar 2026, for wiring harness interference issue. You can also see every Jaecoo recall and all recalls launched in 2026.

Source: DVSA recall R/2026/013, launched 3 February 2026. Data updated 15 October 2026. How we grade urgency.

Sources

  1. The Code does not itself say repairs are free. GOV.UK guidance says "You will not usually have to pay for any repairs or parts under a safety recall." gov.uk Checked 15 Oct 2026.