Mercedes-Benz Sprinter 907 Recall R/2018/209: Blind Spot Monitoring Exit Warning Inoperable After Ignition Switched Off, Who Is Affected And What To Do

DVSA reference R/2018/209, campaign code SRV1806. Data updated daily from DVSA.

Low
How serious
14 Dec 2018
Launched
31
vehicles in the UK
SRV1806
Manufacturer’s campaign code

Mercedes-Benz recalled Sprinter 907 vehicles built between 3 May 2018 and 28 May 2018. Blind spot vehicle exit warning failure. The dealer will update software on affected vehicles. You won't usually pay for it.1

What’s Wrong

Blind spot vehicle exit warning failure.

DVSA's Original Wording

Concern: BLIND SPOT MONITORING EXIT WARNING INOPERABLE AFTER IGNITION SWITCHED OFF Defect: Blind spot vehicle exit warning failure Remedy: Update software on affected vehicles

Contains public sector information licensed under the Open Government Licence v3.0.

The Risk

The recall notice describes the concern as: blind spot monitoring exit warning inoperable after ignition switched off.

The Fix

The dealer will update software on affected vehicles. The fix is a software update, which usually takes under an hour at the dealer.

Are You Affected?

Sprinter 907 built between 3 May 2018 and 28 May 2018 may be included. Mercedes-Benz estimates 31 vehicles in the UK. Enter your registration to check, then confirm by VIN with Mercedes-Benz, because not every car in the date range may be included.

What To Do Now

  1. Check your car by registration above, then by VIN with Mercedes-Benz.
  2. Book with any franchised Mercedes-Benz dealer, quoting the campaign code SRV1806 or the DVSA reference R/2018/209. See how to get a Mercedes-Benz recall fixed.
  3. Follow the letter's instructions until the repair is done. See can you drive a car with a recall?.
LaunchedVehicle and faultSeverityReference
Sprinter 907Propeller shaft weld seamLowR/2025/009
Sprinter 907Replace spring U-bolts of rear axle springsBook soonR/2024/301
Sprinter 907, Sprinter 910B-Pillar ReinforcementLowR/2024/222
Sprinter 907On affected vehicles the wheel rim structure might not meet specifications. Micro cracks might form in the rim structureBook soonR/2023/284
Sprinter 907On affected vehicles the screw connection of the partition wall might not meet specificationsLowR/2023/265

This is one of 833 Mercedes-Benz recalls in DVSA’s data. The Mercedes-Benz recall launched before it was R/2018/283 on 26 Nov 2018, for improve the vehicle emissions via software updates. The one launched after it was R/2018/265 on 17 Dec 2018, for backlight illumination of the hazard warning push button switch is deactivated after…. You can also see every Mercedes-Benz recall and all recalls launched in 2018.


Source: DVSA recall R/2018/209, launched 14 December 2018. Data updated 15 October 2026. How we grade urgency.

Sources

  1. The Code does not itself say repairs are free. GOV.UK guidance says "You will not usually have to pay for any repairs or parts under a safety recall." gov.uk Checked 15 Oct 2026.