Mercedes-Benz Sprinter 907 Recall R/2018/322: The Blind Spot Monitoring Exit Warning Sub Feature Does Not Function As Designed After The…, Who Is Affected And What To Do
- Low
- How serious
- 21 Dec 2018
- Launched
- 8
- vehicles in the UK
- SRV1815
- Manufacturer’s campaign code
Mercedes-Benz recalled Sprinter 907 vehicles built between 12 June 2018 and 10 July 2018. Vehicle exit warning feature does not function as designed after the ignition is switched off. The dealer will update both front door control units software on the affected vehicles. You won't usually pay for it.1
What’s Wrong
Vehicle exit warning feature does not function as designed after the ignition is switched off.
DVSA's Original Wording
Concern: THE BLIND SPOT MONITORING EXIT WARNING SUB FEATURE DOES NOT FUNCTION AS DESIGNED AFTER THE IGNITION IS SWITCHED OFF Defect: Vehicle exit warning feature does not function as designed after the ignition is switched off. Remedy: Update both front door control units software on the affected vehicles.
Contains public sector information licensed under the Open Government Licence v3.0.
The Risk
The recall notice describes the concern as: the blind spot monitoring exit warning sub feature does not function as designed after the ignition is switched off.
The Fix
The dealer will update both front door control units software on the affected vehicles. The fix is a software update, which usually takes under an hour at the dealer.
Are You Affected?
Sprinter 907 built between 12 June 2018 and 10 July 2018 may be included. Mercedes-Benz estimates 8 vehicles in the UK. Enter your registration to check, then confirm by VIN with Mercedes-Benz, because not every car in the date range may be included.
Which Car Is It?
Choose the make and model so we can match recalls to your car.
What To Do Now
- Check your car by registration above, then by VIN with Mercedes-Benz.
- Book with any franchised Mercedes-Benz dealer, quoting the campaign code SRV1815 or the DVSA reference R/2018/322. See how to get a Mercedes-Benz recall fixed.
- Follow the letter's instructions until the repair is done. See can you drive a car with a recall?.
Related Recalls
| Launched | Vehicle and fault | Severity | Reference |
|---|---|---|---|
| Sprinter 907Propeller shaft weld seam | Low | R/2025/009 | |
| Sprinter 907Replace spring U-bolts of rear axle springs | Book soon | R/2024/301 | |
| Sprinter 907, Sprinter 910B-Pillar Reinforcement | Low | R/2024/222 | |
| Sprinter 907On affected vehicles the wheel rim structure might not meet specifications. Micro cracks might form in the rim structure | Book soon | R/2023/284 | |
| Sprinter 907On affected vehicles the screw connection of the partition wall might not meet specifications | Low | R/2023/265 |
This is one of 833 Mercedes-Benz recalls in DVSA’s data. The Mercedes-Benz recall launched before it was R/2018/279 on 20 Dec 2018, for driver support and assist functions distronic hold drive away assist and rcta are not…. The one launched after it was R/2018/372 on 21 Dec 2018, for an incorrect length linkage was mounted on the rotation angle sensor of the rear axle. You can also see every Mercedes-Benz recall and all recalls launched in 2018.
Source: DVSA recall R/2018/322, launched 21 December 2018. Data updated 15 October 2026. How we grade urgency.
Sources
- The Code does not itself say repairs are free. GOV.UK guidance says "You will not usually have to pay for any repairs or parts under a safety recall." gov.uk Checked 15 Oct 2026.