Peugeot ION Recall R/2015/159: Loss Of Power, Who Is Affected And What To Do
- Urgent
- How serious
- 13 Aug 2015
- Launched
- 30
- vehicles in the UK
- ZZZ
- Manufacturer’s campaign code
Peugeot recalled ION vehicles built between 6 August 2011 and 29 March 2012. Due to none conformity during manufacture the resistance of the insulated base inside the motor control unit (MCU) which controls the electric motor may decrease. The recall notice describes the fix as: that are likely to be affected and replace the engine MCU. You won't usually pay for it.1
What’s Wrong
Due to none conformity during manufacture the resistance of the insulated base inside the motor control unit (MCU) which controls the electric motor may decrease. As a result the voltage in the circuit may become unstable causing the warning light to illuminate and the driving motor power to be restricted to the fail safe control. In the worst case scenario the vehicle may not be able to be restarted and the battery may not be able to be charged.
DVSA's Original Wording
Concern: LOSS OF POWER Defect: Due to none conformity during manufacture the resistance of the insulated base inside the motor control unit (MCU) which controls the electric motor may decrease. As a result the voltage in the circuit may become unstable causing the warning light to illuminate and the driving motor power to be restricted to the fail safe control. In the worst case scenario the vehicle may not be able to be restarted and the battery may not be able to be charged. Remedy: Recall the vehicles that are likely to be affected and replace the engine MCU.
Contains public sector information licensed under the Open Government Licence v3.0.
The Risk
If the fault occurs, the recall notice says it could cause the warning light to illuminate and the driving motor power to be restricted to the fail safe control.
The Fix
The recall notice describes the fix as: that are likely to be affected and replace the engine MCU.
Are You Affected?
ION built between 6 August 2011 and 29 March 2012 may be included. Peugeot estimates 30 vehicles in the UK. Enter your registration to check, then confirm by VIN with Peugeot, because not every car in the date range may be included.
Which Car Is It?
Choose the make and model so we can match recalls to your car.
What To Do Now
- Check your car by registration above, then by VIN with Peugeot.
- Book with any franchised Peugeot dealer, quoting the campaign code ZZZ or the DVSA reference R/2015/159. See how to get a Peugeot recall fixed.
- Follow the letter's instructions until the repair is done. See can you drive a car with a recall?.
Related Recalls
| Launched | Vehicle and fault | Severity | Reference |
|---|---|---|---|
| IONTakata | Stop driving | R/2025/366 | |
| IONWater may penetrate into the brake vacuum pump causing corrosion | Urgent | R/2019/457 | |
| IONA non-conformity in an internal component could affect deployment of the passenger airbag | Urgent | R/2017/307 | |
| IONEngine may not start | Low | R/2016/074 | |
| IONBraking efficiency may be affected | Urgent | R/2014/119 |
This is one of 421 Peugeot recalls in DVSA’s data. The Peugeot recall launched before it was R/2015/100 on 26 May 2015, for possibility of loss of directional control. The one launched after it was R/2015/162 on 13 Aug 2015, for malfunction causing instrument panel functions to become inoperable. You can also see every Peugeot recall, all recalls launched in 2015 and loss of power recalls across every make.
Source: DVSA recall R/2015/159, launched 13 August 2015. Data updated 15 October 2026. How we grade urgency.
Sources
- The Code does not itself say repairs are free. GOV.UK guidance says "You will not usually have to pay for any repairs or parts under a safety recall." gov.uk Checked 15 Oct 2026.