Peugeot 2008, 3008, 308 (T9) And 1 More Recall R/2020/207: There Is A Possibility That The Internal Corrosion Protection Of The Subframe Is Not…, Who Is Affected And What To Do

DVSA reference R/2020/207, campaign code JSB. Data updated daily from DVSA.

Low
How serious
9 Jul 2020
Launched
38
vehicles in the UK
JSB
Manufacturer’s campaign code

Peugeot recalled 2008, 3008, 308 (T9) and 1 more vehicles built between 23 February 2015 and 13 March 2015. The internal corrosion protection of the front subframe is not durable enough. The dealer will replace the front subframe assembly. You won't usually pay for it.1

What’s Wrong

The internal corrosion protection of the front subframe is not durable enough.

DVSA's Original Wording

Concern: THERE IS A POSSIBILITY THAT THE INTERNAL CORROSION PROTECTION OF THE SUBFRAME IS NOT DURABLE ENOUGH. Defect: There is a possibility that the internal corrosion protection of the front subframe is not durable enough. Remedy: Replacing the front subframe assembly.

Contains public sector information licensed under the Open Government Licence v3.0.

The Risk

The recall notice describes the concern as: there is a possibility that the internal corrosion protection of the subframe is not durable enough.

The Fix

The dealer will replace the front subframe assembly.

Are You Affected?

2008, 3008, 308 (T9) and 1 more built between 23 February 2015 and 13 March 2015 may be included. Peugeot estimates 38 vehicles in the UK. Enter your registration to check, then confirm by VIN with Peugeot, because not every car in the date range may be included.

What To Do Now

  1. Check your car by registration above, then by VIN with Peugeot.
  2. Book with any franchised Peugeot dealer, quoting the campaign code JSB or the DVSA reference R/2020/207. See how to get a Peugeot recall fixed.
  3. Follow the letter's instructions until the repair is done. See can you drive a car with a recall?.
LaunchedVehicle and faultSeverityReference
3008, 308, 408, 5008VSM software Interior door handlesBook soonR/2026/228
2008, 208Alternator protectionUrgentR/2026/071
3008Peugeot 3008 wheel bolt tighteningBook soonR/2026/045
2008, 208, 3008, 308 and 7 moreOn board diagnosticsLowR/2025/344
2008, 208, 3008, 308 and 2 morePeugeot fuel pipeUrgentR/2025/277

This is one of 421 Peugeot recalls in DVSA’s data. The Peugeot recall launched before it was R/2020/166 on 26 May 2020, for the steering geometry could be incorrectly set. The one launched after it was R/2020/208 on 16 Jul 2020, for the inner tie rods are not correct to specification. You can also see every Peugeot recall and all recalls launched in 2020.


Source: DVSA recall R/2020/207, launched 9 July 2020. Data updated 15 October 2026. How we grade urgency.

Sources

  1. The Code does not itself say repairs are free. GOV.UK guidance says "You will not usually have to pay for any repairs or parts under a safety recall." gov.uk Checked 15 Oct 2026.