Peugeot ION Recall R/2013/038: Possible Loss Of Braking Assistance, Who Is Affected And What To Do

DVSA reference R/2013/038, campaign code ZHU. Data updated daily from DVSA.

Urgent
How serious
22 Mar 2013
Launched
179
vehicles in the UK
ZHU
Manufacturer’s campaign code

Peugeot recalled ION vehicles built between 30 July 2011 and 8 May 2012. An internal component of the braking assistance system vacuum pump may not conform. The dealer will replace the vacuum pump. You won't usually pay for it.1

What’s Wrong

An internal component of the braking assistance system vacuum pump may not conform. This could over time lead to a reduction in braking assistance.

DVSA's Original Wording

Concern: POSSIBLE LOSS OF BRAKING ASSISTANCE Defect: On the affected vehicles an internal component of the braking assistance system vacuum pump may not conform. This could over time lead to a reduction in braking assistance. Remedy: Replacement of the vacuum pump

Contains public sector information licensed under the Open Government Licence v3.0.

The Risk

The recall notice describes the concern as: possible loss of braking assistance.

The Fix

The dealer will replace the vacuum pump.

Are You Affected?

ION built between 30 July 2011 and 8 May 2012 may be included. Peugeot estimates 179 vehicles in the UK. Enter your registration to check, then confirm by VIN with Peugeot, because not every car in the date range may be included.

What To Do Now

  1. Check your car by registration above, then by VIN with Peugeot.
  2. Book with any franchised Peugeot dealer, quoting the campaign code ZHU or the DVSA reference R/2013/038. See how to get a Peugeot recall fixed.
  3. Follow the letter's instructions until the repair is done. See can you drive a car with a recall?.
LaunchedVehicle and faultSeverityReference
IONTakataStop drivingR/2025/366
IONWater may penetrate into the brake vacuum pump causing corrosionUrgentR/2019/457
IONA non-conformity in an internal component could affect deployment of the passenger airbagUrgentR/2017/307
IONEngine may not startLowR/2016/074
IONLoss of powerUrgentR/2015/159

This is one of 421 Peugeot recalls in DVSA’s data. The Peugeot recall launched before it was R/2013/026 on 4 Mar 2013, for spot welds may not hold. The one launched after it was R/2013/096 on 31 Aug 2013, for potential for reduced steering control. You can also see every Peugeot recall, all recalls launched in 2013 and brake recalls across every make.


Source: DVSA recall R/2013/038, launched 22 March 2013. Data updated 15 October 2026. How we grade urgency.

Sources

  1. The Code does not itself say repairs are free. GOV.UK guidance says "You will not usually have to pay for any repairs or parts under a safety recall." gov.uk Checked 15 Oct 2026.