Peugeot 208 V2 Recall R/2026/206: Front Lower Control Arm Fasteningg Loose, Who Is Affected And What To Do
- Book soon
- How serious
- 19 May 2026
- Launched
- 1,761
- vehicles in the UK
- M4R - 261149ME
- Manufacturer’s campaign code
Peugeot recalled 208 V2 vehicles built between 8 July 2025 and 9 September 2025. The front suspension lower control arm upper bolts may not have been tightened according to specification during assembly. The dealer will check the bolts for the correct torque and replace if necessary. You won't usually pay for it.1
What’s Wrong
The front suspension lower control arm upper bolts may not have been tightened according to specification during assembly.
DVSA's Original Wording
Concern: Front lower control arm fasteningg Loose Defect: On affected vehicles the front suspension lower control arm upper bolts may not have been tightened according to specification during assembly. Remedy: Check the bolts for the correct torque and replace if necessary.
Contains public sector information licensed under the Open Government Licence v3.0.
The Risk
The recall notice describes the concern as: front lower control arm fasteningg Loose.
The Fix
The dealer will check the bolts for the correct torque and replace if necessary.
Are You Affected?
208 V2 built between 8 July 2025 and 9 September 2025 may be included. Peugeot estimates 1,761 vehicles in the UK. Enter your registration to check, then confirm by VIN with Peugeot, because not every car in the date range may be included.
Which Car Is It?
Choose the make and model so we can match recalls to your car.
What To Do Now
- Check your car by registration above, then by VIN with Peugeot.
- Book with any franchised Peugeot dealer, quoting the campaign code M4R - 261149ME or the DVSA reference R/2026/206. See how to get a Peugeot recall fixed.
- Follow the letter's instructions until the repair is done. See can you drive a car with a recall?.
Related Recalls
| Launched | Vehicle and fault | Severity | Reference |
|---|---|---|---|
| 2008 V2, 208 V2, Partner, RifterBCM software missing telltale if LKA unavailable | Low | R/2026/183 | |
| 208 V2Fuel Tank | Urgent | R/2025/189 | |
| 208 V2Affected vehicles may have been fitted with tyres containing rubber of non-conformity that could affect handling and also impact regulatory requirements | Book soon | R/2023/111 | |
| 2008 V2, 208 V2, Expert 4 BEV, TravellerThe high voltage harness fitted might not be to the correct specification | Urgent | R/2022/203 | |
| 208 V2Vehicles may have an incorrect tightening torque on several rear axle component fixings | Book soon | R/2022/043 |
This is one of 421 Peugeot recalls in DVSA’s data. The Peugeot recall launched before it was R/2026/183 on 27 Apr 2026, for bCM software missing telltale if LKA unavailable. The one launched after it was R/2026/248 on 29 May 2026, for boxer smart tachograph. You can also see every Peugeot recall, all recalls launched in 2026 and suspension recalls across every make.
Source: DVSA recall R/2026/206, launched 19 May 2026. Data updated 15 October 2026. How we grade urgency.
Sources
- The Code does not itself say repairs are free. GOV.UK guidance says "You will not usually have to pay for any repairs or parts under a safety recall." gov.uk Checked 15 Oct 2026.